enLanguage

Can iron nails be used in roofing?

Nov 12, 2026Leave a message

When a roofing project kicks off, most homeowners and contractors alike reach for standard fasteners to secure shingles, underlayment, or flashing—often with little thought to whether the nail they’re grabbing is the right fit for the job. As an iron nail supplier with decades of experience working with both residential and commercial construction teams, I get asked this question constantly: Can iron nails be used in roofing? The short answer is, it depends—not all iron nails are created equal, and using the wrong type can lead to a roof that fails prematurely, leaks, or even poses safety risks. Let’s break down the science, the common mistakes, and the smart choices when it comes to iron nails for roofing.

First, let’s clarify what we mean by “iron nails.” Traditional iron nails are made from raw or mild steel, a material that’s affordable, easy to shape, and has been used in construction for centuries. But mild steel has a major downside: it’s prone to rust when exposed to moisture, which is unavoidable on a roof. When rust forms, iron expands as it oxidizes, which can push shingles out of alignment, break adhesive seals, and create gaps where water can seep in. That’s why generic iron nails are rarely the top pick for direct shingle installation—but they can work for other roofing-related tasks, like securing wood battens or underlayment in non-exposed areas.

For direct roofing applications, we need to talk about corrosion resistance, a non-negotiable factor in a part of the building that’s exposed to rain, snow, UV rays, and temperature swings. Galvanization is the process of coating iron or steel with zinc to prevent rust, and this is where many contractors go wrong: not all galvanized nails are equal. Hot-dip galvanized nails, which are dipped in molten zinc, offer far better protection than electro-galvanized nails, which have a thinner coating and wear out faster in harsh weather. But even galvanized iron nails have limitations. For example, if you’re working with a specialty roof material, like cedar shingles or standing-seam metal roofing, you might need nails that match the material’s acidity to avoid a chemical reaction that causes corrosion. That’s where specialized fasteners come in—none more critical than the EG Roofing Nail, a product designed specifically for roof installation. I’ll link to more details about that later, but first, let’s address the common pitfalls of misusing iron nails on roofs.

A frequent mistake I see new contractors make is using common nails for roofing. Common nails are one of the most versatile iron nails, perfect for framing, decking, or general construction jobs that don’t require extreme corrosion resistance. You can learn more about their uses on our Common Nail page, but one thing to note: their large, flat head and thick shank make them heavy, which can damage thin shingles or punch through underlying underlayment if driven too hard. Plus, their lack of specialized corrosion protection means they’ll rust within a few years of exposure to the elements, leading to those alignment issues I mentioned earlier. Common nails might work for securing roof trusses or fascia boards, but never for attaching asphalt shingles, the most popular residential roofing material.

Another area of confusion is lost head nails. These nails have a small, countersunk head that sits flush with the surface of the wood, making them ideal for finish carpentry, like installing trim or cabinetry. You can check out their specifications on our Lost Head Nails page, but their tiny head is a problem for roofing: a small head can pull through soft shingles or asphalt layers when wind or pressure builds up. While lost head nails might work for securing small, non-structural roof components, they’re not designed to hold heavy shingles in place during extreme weather, so they’re best left for interior or non-exterior roofing tasks.

EG Roofing Nail factoryFurniture Nail best

What about concrete fasteners? If you’re working on a roof that includes concrete or masonry elements, like a chimney flashing base or a concrete roof deck, EG Concrete Nails AT Shank are your go-to. Their hardened steel shank and fluted design grip concrete tightly, making them perfect for structural attachments that need to withstand heavy loads. But even these shouldn’t be used for shingles—their thick, aggressive shank can split asphalt shingles or damage underlayment, and their galvanization is tailored for concrete exposure, not the specific needs of roof shingles.

Now, let’s get to the nail that was made for roofing: the EG Roofing Nail. Unlike common or furniture nails, which are designed for general or interior use, EG Roofing Nails feature a small, specialized head that’s slightly larger than a lost head nail but smaller than a common nail, perfect for holding shingles without damaging them. They’re also typically hot-dip galvanized, giving them 10 to 15 years of rust protection—enough to outlast the life of most asphalt shingles, which average 20 to 25 years. Their shank is also thinner than a common nail, which makes it easier to drive through shingles and underlayment without splitting, and many have a spiral or ring shank design that grips the wood tighter, resisting wind uplift better than a smooth shank nail. That’s a game-changer for areas prone to hurricanes or heavy winds, where loose shingles can lead to major water damage.

Wait, but can you use other iron nails for roofing in a pinch? Maybe for temporary or non-structural tasks. For example, if you’re installing wood underlayment on a new roof, common nails can work for securing the plywood sheathing before you add the shingles—just make sure they’re hot-dip galvanized to prevent rust from eating through the sheathing over time. Even furniture nails, which are small and decorative, can be used for small, non-load-bearing roof details, like securing wooden edging or trim along the gables. You can find more about their design and uses on our Furniture Nail page, but again, never use them for securing shingles or other critical roof components.

Another factor to consider is compatibility with roofing materials. Some roofs, like cedar or redwood shingles, are acidic, which can cause regular iron nails to corrode faster than usual. If you’re working on a cedar roof, you’ll want to use stainless steel or aluminum nails, not iron, even if they’re galvanized. The acidity of the wood can break down the zinc coating on iron nails, leading to rust and discoloration on the shingles. For metal roofing, which is also acidic, iron nails can react with the metal, causing staining and weakening the fastener over time. In these cases, it’s worth the extra cost to use specialty fasteners that are designed to be compatible with the roof material, rather than cutting corners with standard iron nails.

I’ve seen too many roof replacements that should have lasted 20 years but failed in 5 because of cheap, wrong nails. Last year, I worked with a family in Ohio whose roof had to be replaced after just 8 years—turns out the contractor used common iron nails instead of roofing nails. The nails had rusted, pulling through the shingles during a winter storm, and water had flooded their attic, ruining their insulation and personal belongings. That’s why taking the time to choose the right nail is as important as choosing the right shingle.

So, to circle back to the original question: Can iron nails be used in roofing? The answer is a qualified yes, but only if you choose the right type of iron nail for the specific task. Generic uncoated iron nails are a no-go for any exterior roofing work, as they will rust quickly and fail. Common iron nails can work for structural components like sheathing or fascia, as long as they’re hot-dip galvanized. For any direct shingle attachment, flashing, or exposed roof components, the EG Roofing Nail is the only iron nail designed to meet the demands of a roof’s environment. For specialty tasks like concrete attachments, EG Concrete Nails AT Shank are your pick, and for interior or non-structural roof details, lost head or furniture nails can work—just never use them for load-bearing exterior work.

At the end of the day, a roof is one of the biggest investments a homeowner will make, and using the right fasteners is a small step that can save thousands in repairs down the line. If you’re unsure which iron nail is right for your roofing project, our team is here to help. We stock a full range of specialized iron nails, including the EG Roofing Nail, Common Nail, Lost Head Nails, EG Concrete Nails AT Shank, and Furniture Nail, all tailored to meet construction needs across residential and commercial projects. Whether you’re a contractor sourcing bulk supplies or a homeowner tackling a small roof repair, we can help you pick the right fastener to get the job done right. Reach out to our team to discuss your project needs and get a customized quote for your iron nail requirements.

References

  1. Construction Fasteners and Tools. (2024). "Corrosion Resistance in Fasteners for Roofing Applications." Industry Research Journal of Building Materials.
  2. National Roofing Contractors Association (NRCA). (2023). "Best Practices for Fastener Selection in Asphalt Shingle Roofing." NRCA Technical Bulletin.
  3. Steel Nail Council. (2022). "Galvanization Standards for Mild Steel Fasteners in Exterior Construction." Annual Engineering Report.
  4. Wood Industry Research Council. (2021). "Acid-Metal Reactions in Cedar and Redwood Roofing Fasteners." Journal of Wood Preservation.
  5. Federal Emergency Management Agency (FEMA). (2020). "Wind Uplift Resistance for Residential Roofing Systems." FEMA Construction Guidelines.